Hosting - 3D Histech Pannoramic MIDI II 2.0.5 User Manual

Pannoramic MIDI II 2.0.5 User's Guide
– Slide load tester
•
Slide loading operation can be checked for each of the slides on the tray. Click Insert tray if
the prepared tray is placed onto the feeder plate and pushed in.
Click Start slide insert test button to launch the process. Slides are loaded in but preview
image will not be recorded.
Slides will be tested in cycles based on the value set in the Loading cycle per tray field.
Click Remove tray when finished.

5.7 Hosting

Hosting a live teleconsultation session gives specialists the opportunity to examine the same Live
microscopic image during a real-time counseling even if being in laboratories far away from each
other. This means multiple users can connect to the device at the same time. The user of the scanner
will be the host with direct access to the scanner.
Both the client's and the host's scanner software version must be
identical.
Once client users have connected, they will be able to reach the following functions of scanner:
Live image
•
Preview window
•
Profile content
•
Stage control
•
Each participant see the same live image within the same preview window. The active user can
navigate on the slide and set up a scanning profile. The Start scan function is also available for the
active user. Each participant can make comments in a chat window while examining the slide image.
December 7, 2018 – Rev. 1
Note:
3DHISTECH Ltd.
5.6.2 Services
119(144)