Pannoramic MIDI II 2.0.5 User's Guide
Slide/tray control
Upon clicking the slide icon or entering slide position number at the right side, the slide can
be loaded. Unload the slide by clicking Unload next to slide image, and unload the tray by
clicking Unload next to the rack image.
If there is a lens marking at the bottom of the position preview on the tray image, the
preview image of that slide has already been created, and if a question mark is displayed the
slide was not yet loaded. A hatch and lens marking represent a slide that is loaded at the
moment.
Emergency Position: If a slide has been jammed in, the unloading position where the tray
should be moved can be defined.
Slide removed: Click this button to inform the control software that the slide has been
removed manually.
Objective changer
Live view is on
Live view is on with the shutter closed
Click
displayed live image (i. e. Live view is ON), but not available for camera images during
digitization.
When in Normal live mode, the images are taken with the user-specified exposure time.
One pixel on the monitor corresponds to one pixel on the camera
◦
The live image completely fills the display area
◦
Displays or hides the vertical and horizontal scale bars
◦
Displays the magnifier window
◦
Activates red marking on overexposed pixels
◦
Saves the current image as BMP or JPEG file
◦
December 7, 2018 – Rev. 1
Toolbar for live images
to display the toolbar for Live view. These functions are only available for the
3DHISTECH Ltd.
4.2 Main window functions
35(144)