3D Histech Pannoramic MIDI II 2.0.5 User Manual page 85

Pannoramic MIDI II 2.0.5 User's Guide
5.2.2.3 Exposure Indicator
Exposure time for the live image can be calculated by using the Calculated Exposure time function
. It is available to switch between microsec, millisec, and sec units for the reading of exposure
time.
Figure 56 – Window of Exposure Indicator in Fluorescence scan mode
Select the types of filters you want to use during scanning. You can select the filter types and the
number of channels to be used. The values in the EXC column define the excitation of the Lumencor
illumination, in TW define exposure time weight, and in the DG the amount of digital gain is
displayed. It is also available for you to enable Extended Focus (EF) and/or Z-stack (ZS) functions in
this field.
Exposure Settings
You can set the Exposure time weight (%) here (displayed under TW in the Channel Settings frame).
Set Lumencor excitation intensity at the Excitation intensity (%) field. The defined value will be used
as maximum when applying Auto Exposition time if you activate the Max. excit. Intensity option.
To prevent over-exposure, the Excitation intensity (%) value can be
modified by the software when calculating Auto Exposure time.
December 7, 2018 – Rev. 1
Figure 55 – Focus indicator panel
Caution!
3DHISTECH Ltd.
5.2.2 Microscope Control Panel
85(144)