3D Histech Pannoramic MIDI II 2.0.5 User Manual page 78

Pannoramic MIDI II 2.0.5 User's Guide
Dilate mask
Adjust the slider to enlarge or decrease the scanned area. To switch to manual mode click the top left
corner of the button and the required value can be entered in the box
Preview Toolbar
This section is located at the bottom of the preview image.
Save scanmap
•
Click this icon to save the currently selected areas to scanmap.
Position
•
To position the specimen holder that holds the current slide, click Position sample and then
click on the area of interest on the preview image.
This will define the Live image that you can access from the Live view
Union
•
Add the selected areas to the preview. Mark area for scanning based on the shape selected in
the Preview Toolbar. This area will not be scanned.
December 7, 2018 – Rev. 1 3DHISTECH Ltd.
5.2.2 Microscope Control Panel
.
.
78(144)