Table of Contents
Advertisement
Maintenance and Care
5.9.1 Cleaning the spray jets
Check the spray jets (Fig. 20/1) on the
circular brushes and suction pipe
supports of the suction turbine daily for
accumulations of dirt, clean as
necessary. Switch the solution pump on
briefly to check the spray jets.
5.9.2 Cleaning the sieving filter
Check the sieving filter (Fig. 21/2)
weekly for accumulations of dirt, clean
as necessary. The sieving filter
container must be screwed off and
rinsed.
Fig.21
58
5.9.3 Draining the solution
Empty the solution tank by opening the
screw plugs (Fig. 21/1) (both sides). To
empty the hose lines, switch on the
solution pump briefly.
5.9.4 Filling with solution
Check the fill level of the solution tank
daily. If necessary, open the tank cap
(Fig. 22/1) and fill with solution using a
hose.
1
In the case of longer periods
with temperatures under 0 °C
(risk of frost), the solution
should drained from all
components involved in
feeding the solution (e.g.
solution tank, hoses, pumps).
1
Fig.22
1
2
Advertisement
Table of Contents
