Changing The Sealing Strips; Checking The Spray Jets; Change Deflector Roller - HAKO Scrubmaster B45 Instruction Manual

Maintenance and Service

5.10.4 Changing the sealing strips

Check the sealing strips (Fig. 20/7)
weekly and change them as necessary.
1. Switch off the machine with the main
switch.
2. Lift out the brush head with the brush
head lift.
3. Loosen the knurled screws (Fig. 20/
9) and remove the sealing strips with
the tightening straps.
4. Assemble the new sealing strips so
that they touch the ground lightly.
Only use original spare parts!
58

5.10.5 Checking the spray jets

Check the spray jets daily and clean
them as necessary.
1. Switch off the machine with the main
switch.
2. Lift out the brush head with the brush
head lift.
3. Check the spray jets (Fig. 20/8) for
signs of dirt. After cleaning them, the
spray jets must produce an even
spraying pattern.

5.10.6 Change deflector roller

Check deflector rollers (Fig. 20/4) at
weekly intervals and replace if required.