Mounting The Sweeping Unit (2-Brush System) - HAKO Citymaster 2200 Operating Manual

3.4.3

Mounting the sweeping unit (2-brush system)

A
18
Fig. 101:
03-1481-00-00.fm
Observe the Safety instructions – Vacuum sweeping system,
see page 130.
1. Place the vehicle on a level surface and hold it with the parking brake.
2. Use the upper link Fig. 101-A to adjust the lowered front tool
carrier Fig. 101-18 vertically.
3. Lower the front tool carrier with the tip switch Fig. 101-105. If neces-
sary, adjust the lowering speed with the throttle valve Fig. 101-168.
4. Remove the M16 fastening bolt and the washer Fig. 101-B of the front
tool carrier.
5. Use the trolley Fig. 101-C (option) to align the sweeping unit
Fig. 101-27 centrally and in alignment with the front tool carrier.
6. Raise the front tool carrier with the tip switch Fig. 101-105 and attach
the sweeping unit.
7. Secure the sweeping unit using a washer and M16 fastening bolt.
Remove the trolley from the sweeping unit.
With the option 'sweeping unit with weed brush' Fig. 101-D, carry out
installation accordingly.
B
168
105
C
27
D
Operation
133