Loading A User Job - Weco WF-104 Instruction Manual

WF-104
WF-108
Exit without confirmation
○ Press the S4
Return to the job menu.
○ Press the S4
D
Exit with confirmation
○ Hold down for 3 seconds button S8
Return to the job menu.
○ Press button S8

11.3 LOADING A USER JOB

If using a torch with UP/DOWN buttons you can scroll through the uploaded JOBs.
You can quit the uploaded job with the following methods:
• turn encoders E1 - E2 to change the welding current or voltage.
• press the welding mode selection button (button S2).
• Press the following button:
If there are no JOBS loaded, the UP/DOWN buttons on the torch serve to adjust the welding current.
This function is available when welding mode is not active.
Example of control panel (applies to model WF-108)
L2
L4 L1
S1
S7 Menu Menu
B
S5
C
S6
SELECTION
○ Hold down button S8
A
The job menu appears in display: D4.
○ Press buttons S5
B
The selected parameter is shown by symbol "
WELD THE WORLD
button.
button to exit.
.
again.
E1 D1 L6 L7
D4 E3
C
D
SETTING
to activate the job menu.
and S6 to select parameter OPT.
L5
D2
HOLD
m/min
mm
L12 S3
S4 L10
L9 L11 S2
D
OUTPUT

".
Cod. 006.0001.0940
16/04/2018 V.2.25
ENGLISH
L3
E2 L8
S T O P
S10
L13
S9
L14
L15
A
S8
ACTIVATION
D
OUTPUT
59