Table of Contents
Advertisement
Cruiser 322/402/502T
Power Pulse 322/402/502T
○ Exit with confirmation
- Wait for the memory clear procedure to terminate. This action will automatically close the
menu.
C
○ Exit without confirmation
- Press any
- This action will automatically close the menu.
6
SET-UP (INITIAL SET-UP OF THE WELDING POWER SOURCE)
L1
SEt
L2
L3
L18
L16
ACTIVATION/
○ Set the welding power source ON/OFF switch to "O" to switch the unit off.
○ Holding the S2
[
SIMULTANEAOUS ACTIONS]
A
- SEt UP : The message appears for a few seconds on the following displays: D1-D2.
- Coo Aut: The message appears on the following displays: D1-D2.
○ Use the S2
Menu
○ Exit with confirmation
C
- Press any button (except S2) for example S3
- This action will automatically close the menu.
WELD TH E W O R L D
button.
button (except S3).
UP
L26
C
EXIT
A
button down, turn the power source switch to "I" to start the equipment.
, button to scroll through the settings to be modified.
, edit the value of the selected setting.
.
Cod. 006.0001.1680
09/06/2020 V.2.10
ENGLISH
B
L32
L33
L36
15
Advertisement
Table of Contents
