F80 Set Display Off Mode - SMC Networks PF3A801H-L Operation Manual

■[F80] Set display OFF mode
This function will turn the display OFF if no buttons are pressed for 30 seconds.
<Operation>
Display [F80] by pressing UP or DOWN button in function selection mode.
Select display OFF mode
Press the UP or DOWN button to select display OFF function.
Press the SET button to set.
: In display OFF mode, the under bar of sub display flashes.
: When any button is activated, the display will turn on. If no button operation is performed within
30 seconds, the display will turn off again.
Press the SET button.
[F80] Setting of display OFF mode completed
-54-
Move on to select display OFF mode.
Return to function selection mode.
No.PF※※-OMY0005