F3 Select Digital Filter - SMC Networks PF3A801H-L Operation Manual

■[F 3] Select digital filter
The digital filter can be selected to filter the flow rate and pressure measurement.
Output chattering or display flicker in measurement mode can be reduced by setting the digital filter.
<Operation>
Display [F 3] by pressing UP or DOWN button in function selection mode.
Select digital filter (flow rate)
Press the UP or DOWN button to select the flow rate digital filter.
Press the SET button to set.
Select digital filter (pressure)
Press the UP or DOWN button to select the pressure digital filter.
Digital filter set range: 0.00 to 30.00 [s]
Press the SET button to set.
: Each set value is a guideline for 90% response time.
: Both the switch output and flow display are affected.
Press the SET button.
[F 3] Digital filter setting completed
-45-
Move on to select digital filter (flow rate).
Move on to select digital filter (pressure).
Return to function selection mode.
No.PF※※-OMY0005