■[F80] Display OFF mode
This function will turn the display OFF if no buttons are pressed for 30 seconds.
<Operation>
Press the
or
[dSP] and [the current set value] are displayed in turn on the sub display.
Display OFF mode
[dSP] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
: In display OFF mode, the decimal points on the main display will flash.
: When any button is operated, the display will turn on. If no button operation is performed for
another 30 seconds, the display will turn off again.
button in function selection mode to display [F80] on the main display.
button to select.
[F80] Setting of display OFF mode is completed.
Return to function selection mode.
Press the
button.
Press the
button to set.
-51-
No.PF※※-OMS0002-B