Table of Contents
Advertisement
Operating environment
•Do not use the product in an environment where the product is constantly exposed to water splashes.
Otherwise failure or malfunction can result. Take measures such as using a cover.
•Do not use the product in an environment where corrosive gases or fluids can be splashed.
Otherwise damage to the internal parts can result, causing malfunction.
•Do not use the product in a place where the product could be splashed by oil or chemicals.
If the product is to be used in an environment containing oils or chemicals such as coolant or cleaning solvent,
even for a short time, it may be adversely affected (damage, malfunction, or hardening of the lead wires).
•Do not use in an area where surges are generated.
When there are machines or equipment that generate large surges near the product (magnetic type lifter, high
frequency inductive furnace, motor, etc.), this can result in deterioration and damage of the internal components.
Take protective measures to isolate the surge sources, and prevent the lines from coming into close contact.
•Do not use a load which generates surge voltage.
When a surge-generating load such as a relay or solenoid is directly driven, use the product with built in surge
protection.
•The product is CE marked, but not immune to lightning strikes. Take measures against lightning strikes
in the system.
•Mount the product in a location that is not affected by vibration or impact.
Otherwise it can cause damage or malfunction.
•Do not use the product in the presence of a magnetic field.
Malfunction can result.
•Do not let foreign matter, such as wire debris, get inside the product.
Otherwise it can cause damage or malfunction.
•Do not use the product in an environment that is exposed to temperature cycle.
Heat cycles other than ordinary changes in temperature can adversely affect the internal components of the
product.
•Do not expose the product to direct sunlight.
If using in a location directly exposed to sunlight, protect the product from the sunlight.
Failure or malfunction may occur.
•Keep within the specified ambient temperature range.
The ambient temperature range is 0 to 50
Operation under low temperature may lead to damage or operation failure due to frozen moisture in the fluid or air.
Protection against freezing is necessary.
Mounting of an air dryer is recommended for elimination of drainage and water.
Avoid abrupt temperature changes even within the specified temperature range.
•Do not operate close to a heat source, or in a location exposed to radiant heat.
Insufficient air quality may cause operation failure.
o
C.
-9-
No.PF※※-OMY0005
Advertisement
Table of Contents
