SMC Networks PF3A801H-L Operation Manual page 40

a. Flow rate/temperature/pressure is selected
Select output mode
Press the UP or DOWN button to select the output mode.
Press the SET button to set.
Reversed output setting
Press the UP or DOWN button to select reversed output.
Press the SET button to set.
Setting of set value
Set the value based on the setting method on page 27.
Press the SET button to set.
Setting of hysteresis
Set the value based on the setting method on page 27.
Press the SET button to set.
Hysteresis mode: [P_1]
Window comparator mode: [P1L] [P1H]
"P" is changed to "n" as [P_1] → [n_1] when reversed output is selected
The snap shot function can still be used.
Hysteresis mode: [H_1]
Window comparator mode: [WH1]
The snap shot function can still be used.
-39-
Move on to the reversed output.
Move on to setting of set value.
Move on to setting of hysteresis.
Move on to the ON delay time input.
No.PF※※-OMY0005