Table of Contents
Advertisement
1: "R" means Read and "W" means Write.
2: Refer to the table below for the symbol.
Data type
Symbol
(IO-Link standard)
U8
UIntegerT
U16
S16
IntegerT
F32
Float32T
3: "Y" indicates that the parameter setting data is saved to the master, and "N" indicates that the parameter is not saved.
4: Read/write to un-selectable items will be rejected depending on the product No.
[Toggle output command]
Item
Measured value
OUT output bit
SW output bit
Pulse output 2
Display unit bit
Unit reference bit
Flow diagnosis bit
Temperature diagnosis bit
Pressure diagnosis bit
Error bit
System error bit
Data length
Bit [byte]
8[1]
16[2]
16[2]
32[4]
Value
0
Accumulated
1
Flow rate
2
Temperature
3
Pressure
16
OUT1
17
OUT2
32
Accumulated 1
33
Accumulated 2
34
Flow rate 1
35
Flow rate 2
36
Temperature 1
37
Temperature 2
38
Pressure 1
39
Pressure 2
65
208
209
224
225
226
254
255
Unsigned integer
Signed integer
Floating point number
Connected with hardware output
(Since OUT1 is IO-Link communication,
only the indicator light is linked.)
Reverse only the bits of the process data.
Even if the bit is the object of OUT output, it does not
affect the OUT output and indicator light.
Connected with hardware output
(Not connected as OUT2 does not have the hardware)
This is valid only when the output object of OUT2 is
pulse output.
-88-
Description
Notes
s
No.PF※※-OMY0005
Advertisement
Table of Contents
