SMC Networks PF3A801H-L Operation Manual page 39

<Operation>
Display [F 1] by pressing UP or DOWN button in function selection mode.
Select the target for setting
Press the UP or DOWN button to select the target for setting.
: [F 0] Only the object selected in OUT1 Output is displayed as OUT1 on the upper left.
: For Pulse output, error output and output OFF, only the object selected in [F 0] OUT1 Output is displayed.
Press the SET button to set.
a. Flow rate/temperature/pressure is selected: Refer to page
b. Accumulated flow is selected: Refer to page
c. Accumulated pulse output is selected: Refer to page
d. Error output is selected: Refer to page
e. Output OFF is selected: Refer to page
Press the SET button to set.
: Selected item becomes valid after pressing SET button.
: After enabling the setting by pressing SET button, it is possible to return to the measurement mode by keeping pressing SET button.
Press the SET button.
41
43
43
[F 1] Setting of OUT1 completed
-38-
Move on to select the target for setting.
Move on to settings.
39
42
Return to function selection mode.
No.PF※※-OMY0005