Table of Contents
Advertisement
Display
Element
Main display
Operation LED
Sub display
UP button
SET button
DOWN button
Units display
(Instantaneous flow value)
Units display
(Accumulated value)
Units display
(Pressure value)
Units display
(Temperature value)
IO-Link status indicator
light
Displays the instantaneous flow value, pressure value and error codes. (2 colour display)
Indicates the output status of OUT.
When the output is ON: Orange LED is ON.
When the accumulated pulse output mode is selected, the output display will turn off.
Displays the accumulated flow, temperature value, set value, and peak/ bottom value when
in measurement mode.
Selects the mode and the display shown on the Sub display, or increases the switch point.
Press this button to change the mode and to set a value.
Selects the mode and the display shown on the Sub display, or decreases the switch point.
Indicates the flow measurement units currently selected.
Indicates the flow measurement units currently selected.
Indicates the flow measurement units currently selected.
Indicates the flow measurement units currently selected.
LED is ON when OUT1 is used in IO-Link mode. (LED is OFF in SIO mode)
Description
-13-
No.PF※※-OMY0005
Advertisement
Table of Contents
