Entering The Position And Time - Icom IC-M510 Instruction Manual

D Deleting an entered ID
(Example: Deleting an Individual ID: STATION 2)
1. Open the "Individual ID" screen.
[MENU] > Settings > DSC > Individual ID
2. Select "STATION 2," and then push
• "Delete the ID. Are You Sure?" is displayed.
3. Push OK to delete.
L Push Cancel to cancel the deletion.
• The selected ID is deleted, and then returns to the
previous screen.
TIP: You can edit an ID and its name by pushing
in step 2.

■ Entering the position and time

A Distress call should include the vessel's position, date, and time. If no GPS data is
received, manually enter the position and Universal Time Coordinated (UTC) time.
NOTE:
• The manual entry is disabled while valid GPS data is received.
• The manually entered position and time is valid only for 23.5 hours, or until turning
OFF the transceiver.
1. Open the "Position Input" screen.
[MENU] > Settings > DSC > Position Input
2. Enter the latitude.
TIP:
• Select a number or a compass direction using [▲],
[▼], [◄], and [►].
• Select "←" or "→" on the screen, or rotate
[CH/ENT] to move the cursor.
• Select Next and then push [ENT] or [CH/ENT] to
save the selected number.
3. Enter the longitude and the UTC time.
L See the TIP in step 2 to enter.
4. After entering, push
previous screen.
• The "DSC" screen is displayed.
DIGITAL SELECTIVE CALLING (DSC)
Delete .
Finish
to save, and return to the
Edit
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
20