Icom IC-M510 Instruction Manual page 20

2
PANEL DESCRIPTION
D Software key functions
Dualwatch/Tri-watch
(Except for the NLD version)
Push to start or stop the Dualwatch or Tri-
watch.
Channel/Weather channel [CH/WX]
Push to select regular channels or Weather
channels.
L The Weather channel is for only the USA
versions. [CH] is displayed for other
versions.
L While the Call channel or Channel 16 is
displayed, push this key to return to the
regular channel mode.
DSC Log
Push to display the received call log or
distress message log.
Waypoint [WPT]
Push to save your position information to
the transceiver.
Navigation [NAV]/[Stop NAV]
Push to start navigation.
While navigating, push to stop navigation.
Man Overboard
[MOB]/[Stop MOB]
Push to enter the Man Overboard (MOB)
mode.
While in the Man Overboard (MOB) mode,
push to stop the Man Overboard (MOB)
mode.
Anchor
[Anchor]/[Stop Anchor]
Push to start or stop the Anchor watch
function.
High/Low [HI/LO]
Push to set the output power level to high
or low.
L Some channels are set to only low power.
7
(p. 18) Voice Scrambler [Voice SBL]
Push to set the Voice Scrambler function.
L This function is displayed only when the
voice scrambler unit is installed.
RX Hailer
(p. 11)
Push to display the RX Hailer popup
screen.
L To use this function, the external hailer
speaker must be connected to the CT-M500
connected to the IC-M510/IC-510E.
LO/DX
(For only the USA version)
Push to turn the Attenuator function ON or
OFF.
(p. 43)
L The "LOC" icon is displayed when the
Attenuator function is ON.
AquaQuake
(p. 63)
Hold down to turn ON the AquaQuake
function to clear water from the speaker
grill.
Favorite [FAV
(p. 67)
Push to set or clear the displayed channel
as a Favorite channel.
CH Name
(p. 65)
Push to edit the name of the displayed
channel.
Backlight
Push to display the Backlight popup
screen.
In the Backlight popup screen, you can set
the backlight level, and the display mode.
(p. 66)
(p. 3)
★
]
(p. 76)
(p. 73)
(p. 85)
(p. 14)
(p. 17)
(p. 14)
(p. 12)