Table of Contents
Advertisement
D Deleting an entered ID
(Example: Deleting an Individual ID: STATION 2)
1.
Open the "Individual ID" screen.
[MENU] > Settings > DSC > Individual ID
2.
Select "STATION 2," and then push
• "Delete the ID. Are You Sure?" is displayed.
3.
Push
OK
to delete.
L Push Cancel to cancel the deletion.
• The selected ID is deleted, and then returns to the
previous screen.
TIP: You can edit an ID and its name by pushing
in step 2.
■ Entering the position and time
A Distress call should include the vessel's position, date, and time. If no GPS data is
received, manually enter the position and Universal Time Coordinated (UTC) time.
NOTE:
• The manual entry is disabled while valid GPS data is received.
• The manually entered position and time is valid only for 23.5 hours, or until turning
OFF the transceiver.
1.
Open the "Position Input" screen.
[MENU] > Settings > DSC > Position Input
2.
Enter the latitude.
TIP:
• Select a number or a compass direction using [▲],
[▼], [◄], and [►].
• Select "←" or "→" on the screen, or rotate
[CH/ENT] to move the cursor.
• Select
Next
and then push [ENT] or [CH/ENT] to
save the selected number.
3.
Enter the longitude and the UTC time.
L See the TIP in step 2 to enter.
4.
After entering, select
[CH/ENT] to save, and return to the previous screen.
• The "DSC" screen is displayed.
DIGITAL SELECTIVE CALLING (DSC)
Delete
.
Finish
, and then push [ENT] or
Edit
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
20
Advertisement
Table of Contents
