Anchor Watch - Icom IC-M510 Instruction Manual

■ Anchor Watch

Anchor Watch is the function to sound an alarm when your vessel is at anchor and has
drifted.
D Starting Anchor Watch
Anchor
 Push to start the Anchor Watch mode.
• (a red circle) is displayed as the start position of
anchor watch.
• A red dashed is displayed as circle as the range of
anchor watch.
TIP: You can also start the Anchor Watch mode by
selecting the "Start Anchor Watch" item on the Menu
screen.
[MENU] > Navigation > Start Anchor Watch
L When your vessel exceeds the range of the anchor
watch, "Exceeded anchor radius!" is displayed.
D Stopping Anchor Watch
Stop Anchor
1. Push
• "Deactivate anchor watch. Are you sure?" is displayed.
2. Push [OK].
• (a red circle) and a red dashed circle disappear.
TIP: You can also stop the Anchor Watch mode by
selecting the "Stop MOB" item on the Menu screen.
[MENU] > Navigation > Stop Anchor Watch
to stop the Anchor Watch mode.
OTHER FUNCTIONS
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
66