Recommendation; Key Icon Description - Icom IC-M510 Instruction Manual

■ Recommendation

CLEAN THE TRANSCEIVER AND MICROPHONE THOROUGHLY WITH FRESH
WATER after exposure to saltwater, and dry it before operating. Otherwise, the
transceiver's keys and switches may become unusable, due to salt crystallization.
NOTE: If the transceiver's waterproof protection appears defective, carefully clean it
with a soft, damp (fresh water) cloth, then, dry it before operating.
The transceiver may lose its waterproof protection if the case or microphone is cracked
or broken, the microphone connector is not screwed in completely, or the transceiver
has been dropped.
Contact your Icom distributor or your dealer for advice.

■ Key Icon Description

The keys are described in this manual as follows:
The keys that have words or letters on them are described with the characters "[ ]."
Example: [MENU], [CLEAR]
The software keys are described with the icon such as
keys are shown at the bottom of the display. Push the key below the desired function.
You can use the following keys on the Menu screen.
FUNCTION
Select
Enter
Go to the next tree level
Go back to the previous tree level Push [CLEAR], or [◄].
Cancel
Exit
Information:
In this instruction manual, the transceiver model names are described as shown below.
U.S.A.: USA
Europe: EUR, General
Germany: FRG
Netherlands: NLD
U.K.: UK
Finish
ACTION
Push [▼] or [▲], or rotate [CH/ENT].
Push [ENT], or [CH/ENT].
Push [ENT], [►], or [CH/ENT].
Push [CLEAR] or Cancel
Push [MENU] or Exit
or DTRS . The function of the
.
.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
x