Entering The Position Data And Time - Icom IC-M803 Instruction Manual

7
DSC OPERATION
I Entering the position data and time
A Distress call should include the vessel's position,
date, and time� If no GPS data is received, manually
enter the position and Universal Time Coordinated
( C) time
NOTE:
anual entr is isa le
•
received�
• The manually entered position and time is valid
only for 23�5 hours�
1� Open "Position Input�"
[MENU] > DSC Settings > Position Input
2� Enter the latitude, and then push
L o select ( ort latitu e) or S (Sout latitu e)
select "N" or "S" on the screen and push [ENT], or
pus a e pa
3� Enter the longitude and the UTC time, and then
push �
L o select ( est longitu e) or
select or
pus a e pa
26
ile ali GPS ata is
Rotate
+
Push
e en t e cursor is on t e
Rotate
+
Push
( ast longitu e)
on t e screen an pus
e en t e cursor is on t e
4� Enter the UTC time, and then push
• After
data and time is set, and the DSC setting screen is
displayed�
5� Push [MENU] or
� screen�
• The entered position data and time, and "Manual" is
displayed in the Position data and Time area�
or S
or
or
is pushed, the entered position
Rotate
+
Push
to return to the Main
�