Icom IC-M510 Instruction Manual page 77

D Editing a waypoint
A waypoint's name, latitude, longitude data can be edited.
L You cannot edit the waypoint that is being used for navigation.
1. Open the "Waypoint" screen.
[MENU] > Navigation > Waypoint
2. Push [▲] or [▼], or rotate [CH/ENT] to select a waypoint.
L Push Sort to sort the waypoints by Name or Range.
Edit
3. Select .
L See steps 3 ~ 9 in "Entering a waypoint" on page 63.
D Deleting a waypoint
A waypoint can be deleted from the Waypoint list.
L You cannot delete the waypoint that is now being used for navigation.
1. Open the "Waypoint" screen.
[MENU] > Navigation > Waypoint
2. Push [▲] or [▼] or rotate [CH/ENT] to select a waypoint.
L Push Sort to sort the waypoints by Name or Range.
Delete
3. Push .
• "Delete the Waypoint. Are you sure?" is displayed.
OK
4. Push .
• The selected waypoint is deleted, and the transceiver returns to the previous screen.
D Navigating to a waypoint
The transceiver assists you to navigate to a selected waypoint in the Waypoint list.
L See "Navigation" on page 67 for details.
1. Open the "Waypoint" screen.
[MENU] > Navigation > Waypoint
2. Push [▲] or [▼] or rotate [CH/ENT] to select a waypoint.
L Push Sort to sort the waypoints by Name or Range.
NAV
3. Push .
• "Start navigation. Are you sure?" is displayed.
4. Push .
OK
• The plotter screen is displayed, and the transceiver starts to navigate to the waypoint.
• is displayed on the plotter screen.
L See step 4 in "Using
TIP: You can also start navigation in the "Detail" screen of the waypoint.
1. Repeat steps 1 and 2.
2. Push , [ENT], or [CH/ENT].
Details
• The "Detail" screen is displayed.
3. Repeat steps 3 and 4.
NAV " on page 67.
OTHER FUNCTIONS
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
64