Icom IC-M510 Instruction Manual page 54

7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Test call/Position Report call
Example: Receiving a Test call
When a Test call is received:
• An alarm sounds.
• "Received Test Call" is displayed.
Alarm OFF
1. Push
2. Push the Software Key below your next operation.
Ignores the call and returns to the operating
Ignore
:
screen.
• The call is saved in the DSC Log.
• "
Holds the RX call task, and returns to the
Hold :
Main screen.
Sends a Test Acknowledgment "Able to
Able
:
Comply."
( Able to
• The call is saved in the DSC Log.
comply)
: Accepts the call.
Accept
• Displays the received call's information.
• The call is saved in the DSC Log.
• The received call's information is
Push
Test Acknowledgment. (p. 30)
Push
41
to turn OFF the alarm.
" blinks continuously until you display
the call message.
displayed.
ACK , and then push
Resend
to resend.
Call to send a