Table of Contents
Advertisement
Selecting in the AIS list:
1.
Open the list screen.
[MENU] > AIS > Target/Danger/Friend list
2.
Push [▲] or [▼] or rotate [CH/ENT] to select an AIS target.
3.
Push
.
NAV
• "Start navigation. Are you sure?" is displayed.
4.
Push
to start navigation.
OK
• The plotter screen is displayed, and the transceiver starts to navigate.
•
is displayed on the plotter screen.
TIP: You can also start navigation in the details on the AIS target.
1.
Repeat steps 1 and 2.
2.
Push
, [ENT], or [►].
Details
• The "Details" screen is displayed.
3.
Repeat steps 3 and 4.
D Stopping navigation
Stop NAV
1.
Push
to stop navigation.
• "Stop navigation. Are you sure?" is displayed.
2.
Push
.
OK
• The transceiver stops to navigate, and then returns to
the previous screen.
D Resetting navigation
The transceiver resets the start position, and restarts
navigation from your current position.
L The function works only when the transceiver is receiving
valid GPS signals.
L The function cannot work while in the MOB mode, or when
the transceiver does not navigate.
1.
Open the "Reset Navigation" screen.
[MENU] > Navigation > Reset Navigation
• "Reset navigation. Are you sure?" is displayed.
2.
Push
OK
.
• The transceiver resets the start position, and restarts
navigation from your current position.
OTHER FUNCTIONS
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
68
- Quick Links:
- Entering the Mmsi Code
- Specifications
Hide quick links:
Advertisement
Table of Contents
