Icom IC-M510 Instruction Manual page 39

9. When you receive an Acknowledgment "Able to comply":
• An alarm sounds.
• The screen on the right is displayed.
Alarm OFF
10. Push to turn OFF the alarm.
• The channel assigned in step 7 is automatically
selected.
L If the called station cannot use the channel that you
assigned, a diff erent channel is selected by the other
station.
Close Window
11. Push
12. Hold down [PTT] to communicate.
TIP: If you received an Acknowledgment "Unable to comply":
Alarm OFF
1. Push
• The Acknowledge information is displayed.
STBY
2. Push
D Sending an Individual Acknowledgment
When you have received an Individual call (p. 38), send an Acknowledgment to the
calling station. When the Auto Ack is set to "Manual," you can select an appropriate
acknowledgment type.
1. While an Individual call is being received, push
Alarm OFF
to turn OFF the alarm.
• The received call's information is displayed. The received call's information is displayed.
Accept
2. Push .
• The Acknowledgment category screen is displayed.
L If you want to send an Acknowledgment "Able to
comply" right away, push Able .
L If you cannot communicate, and want to return to the
operating screen, push Ignore .
ACK Able ACK Unable
3. Push ,
Acknowledgment type.
Sends an Acknowledgment without any
ACK Able :
changes.
(Able to
Comply)
Sends an Acknowledgment but cannot
ACK Unable :
communicate.
(Unable to
Comply):
Sends an Acknowledgment. You can
ACK New CH :
specify the Voice Communication
(Propose
channel.
New CH)
(Example: Channel 16)
4. Push Call to send the Acknowledgment.
DIGITAL SELECTIVE CALLING (DSC)
.
to turn OFF the alarm, and then push
OK
, and then to return to the operating screen.
ACK New CH
, or
Close Window
to select the
7
1
2
3
4
5
6
.
7
8
9
10
11
12
13
14
15
16
17
18
26