Using The Intercom - Icom IC-M510 Instruction Manual

■ Using the Intercom

The optional Intercom function enables you to communicate between the deck and the
cabin. The optional HM-195 commandmic
iOS device is required for Intercom operation.
L Connect the HM-195 or HM-229 as described on page 101.
L Download the RS-M500 when you operate by the Android/iOS device.
NOTE: While using the Intercom function,
• Transmit is disabled.
• The received call audio is muted.
• Operation is disabled on devices other than the two that are using the Intercom function.
1. Open the "Intercom" screen.
[MENU] > Intercom
2. Select the unit, then push [ENT] or [CH/ENT].
• Enters the Intercom mode.
3. Hold down Call
• The transceiver and the command microphone, or the
mobile device sound beeps while holding down Call .
• "Call" is displayed.
4. After releasing
the microphone at your normal voice level.
• " Talk" is displayed.
L To adjust the transceiver volume level, rotate [VOL].
L To adjust the command microphone's intercom
volume level, rotate [VOL/SQL] (Dial) on the
command microphone.
5. After releasing [PTT], you can hear the response
through the speaker.
6. Push [CLEAR] to return to the previous screen.
NOTE: While in the Intercom mode, the transmit and
receive functions are disabled. When the transceiver is
transmitting, the Intercom function is disabled.
IV
to sound the intercom beeps.
, hold down [PTT] and speak into
Call
OTHER FUNCTIONS
, HM-229 commandmic
™
9
™, or an Android/
V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
72