Manual Data Logging; Graphic Display - Thermo Scientific RadEye GX Operating Instructions Manual

4.12

Manual data logging

Measurement values in scaler mode are stored in with history
with a record number. The record number is shown in the display.
Measurement values are stored
under record number 26
When setting the history time interval to 0s the actual counting
rate with a record number is stored in the history by a long press
on ▲/Info key. The last saved record is shown in the display. In
this mode dose rate display and peak/mean display is not availa-
ble
Last record number
4.13

Graphic display

If enabled, one or more short presses on the "On/▼" key display
a graphical view of the count rate. This display is only available
in ratemeter mode.
RadEye GX, GX-L
Pi/Ff 14.09.2016
DB-074 E 4-9