3.3.2
Accumulated counts
With accumulated counts selected via radeye.exe the RadEye
show the collected counts within the measurement time in place
of the mean value. This option is only available in combination
with measurement unit "cps"
3.4
Background measurement
To enter background measurement select in submenu "Back-
ground" "Start Bgr.meas".
The background measurement starts with the parameter set in
submenu option „Set parameter". To start the measurement press
the up key. While the measurement is in progress "Exit" is blink-
ing.
Preset time
Elapsed time
The measurement is finished if either the elapsed time arrived the
preset time or the accumulated counts reached preset count.
3-16
Pi/Ff 14.09.2016
Action of
"Info" key
DB-074 E
Measure-
ment value
Preset count
Accumulated
counts
RadEye GX, GX-L