Thermo Scientific RadEye GX Operating Instructions Manual page 21

Acoustic alarm (Sound)
LED alarm indication
Vibrator alarm indication
Acoustic count rate indication
Autosend
History recording interval
*) These parameters can only be changed through the serial
interface by means of the configuration software.
With the setting of the history recording interval of 120 s, the
last 52 hours of operation will be stored in the history
memory.
These parameters (except calibration parameters) can be
changed with the help of RadEye buttons and the optional PC-
program „RadEye.EXE", version 1.39.0 and greater, and the
cable 42540/29 or 42540/26.
RadEye GX, GX-L
Pi/Ff 14.09.2016
active
active
active
Single Pulse
off
120 s *)
DB-074 E 2-7