Failure Indication - Thermo Scientific RadEye GX Operating Instructions Manual

6.2

Failure indication

In case of a failure the beeper generates a sharp single pulse every
32 s.
The corresponding failure message is displayed in the LCD:
6-2
Pi/Ff 14.09.2016
Error high voltage generation
No detector pulse within configured
time
EEPROM with calibration data shows
EEPROM Read or EEPROM Write
error.
A Watchdog Error indicates that the
micro controller has problems to work
on its tasks in a given timeframe.
Reasons are strong electromagnetic
pulses, firmware errors or hardware
issues.
DB-074 E RadEye GX, GX-L