Alarm Indication - Thermo Scientific RadEye GX Operating Instructions Manual

Finder mode:
In the Finder mode, the sound frequency depends on the pulse rate
of the detector. The more detector pulses above the count rate that
is present at the moment of the activation of the finder mode are
captured by the detector, the higher the tone.
The finder mode must be enabled in the menu.
It is activated and deactivated by two times pressing the right or top
button:
4.2

Alarm indication

Each time the first alarm threshold is exceeded, the alarm devices
beeper, LED and the vibrator become active, if they are enabled.
Alarm 1: LED slowly blinking, two frequency alarm tone
Alarm 2: LED quick blinking, continuous alarm tone
Dose Alarm: LED constantly on, continuous alarm tone, vibrator
slow.
4-2
Pi/Ff 14.09.2016
Indication of activated
finder mode
DB-074 E RadEye GX, GX-L