Operation Mode; Scaler Parameter - Thermo Scientific RadEye G20-ER Operating Instructions Manual

and RadEye G20-ER. However, for convenience reasons, the user
may select this unit for RadEye G20-10 and RadEye G20-ER10
with the understanding that the measured quantity is still dose
equivalent H*(10) and that the relation to the calibration is set as
1 R = 1 rem = 10 mSv.
3.1.4

Operation mode

This submenu is used to select between ratemeter and scaler
mode. A " " shows the active configuration.
3.1.5

Scaler parameter

This submenu is used to set the parameters for scaler measure-
ments. "PresetTimeMode" is used to measure a defined time.
"PresetCntMode" is used to measure a defined number of counts.
With "Auto restart" the RadEye G20 restarts automatically the
measurement. "Set Time/Count" edit the preset time and count.
RadEye G20
Iw/Tr/Ff 26.11.2012
DB-067 E 3-5