Mircom FleX-Net Configurator Manual page 68

inactive Job. The Active Job in the panel is shown in Orange color. You can also delete an
inactive job by highlighting it and clicking the Delete button at the bottom of the dialog or
pressing the Delete key on your keyboard.
To activate an inactive job, right click on the job name (in black color) and choose Activate.
After the Activation, the system will set to the job selected and reboot, the Manage Job tree
is refreshed.
To deactivate the active job, right click on the job name (in orange color) and choose
Deactivate. After the deactivation, the system will set to factory default and reboot. This will
disconnect the configurator and you will need to reconnect after the panel finishes
rebooting. If you still need to do other tasks, you will need to reopen the Manage Jobs
dialog.
The Select All button allows user to quickly select or deselect all jobs. Then user can Click
Delete Selected button to delete all select jobs. Or user can use mouse to click the checkbox
beside the job name to select the job to be deleted. The Refresh button will refresh the
Manage Job tree view.
There is a limit of 3 jobs. Send Job will fail if this limit would be exceeded. You can use this
dialog to remove jobs to make room for a new one.
68