Mircom FleX-Net Configurator Manual page 43

will receive another RIFF section, to include some naming and versioning information. Once
a WAV file has been imported, it will be listed in the Audio Clips and is available for use in
digitized messages.
Play When this button is pressed it plays the selected clip.
If the type is External, a user's recorded WAV file is played.
If the type is Built In then either a single firmware WAV or a complete firmware message is
played.
Stop This button can be pressed to stop the audio playback.
Remove When this button is pressed the selected clip is removed from the database. The
deletion will not succeed if the clip is referenced by any message in any job on the database
or if a Built In clip is selected. Once the clip is deleted it is no longer available for use in any
job.
Audio Message
This pane lists the WAV files and commands that comprise a message.
You can give the message a name. Refer to this name when configuring a Digitized Message
switch, or for use as Alert or Evac, etc.
Composition
Commands in the Composition list view (loops and clips) can be added, deleted and moved
up and down (within the same parent node).Add Loop command will add a loop under the
selected node. Repeat count for inserted loop is 1 by default. Maximum number of nested
loops is 4.
Del button
Del button will delete the node in selection (loop or clip) AND, if it's a loop, all its children
loops and clips from the right panel. Delete called from the root Composition node will
delete all loops and clips in the entire message collection except Composition node itself
(never deleted).
Up, Down buttons
Up, Down buttons will move the selected node (loop or clip), together with all its children
nodes up and down within its sibling nodes ONLY. There is no option in the GUI to move
selected node under the parent or child node. If User needs to move selected mode outside
its current level, just delete it and recreate on the proper level.
43