Paste; Paste Special; User Preferences; Print - Mircom FleX-Net Configurator Manual

Paste

Items that have been copied to the clip board can be pasted to another location in the job
using this command.
See Copy and Paste for full details.

Paste Special

Items that have been copied to the clip board can be pasted to another location in the job.
By choosing Paste Special you can override some of the defaults.
One of the Paste Special dialogs will open.
Paste Special or Paste Special for Display Items
See Copy and Paste for full details.

User Preferences

This Command opens the User Preferences dialog, where you can specify the locations of
the file folders Configurator uses and customize the configuration tool.

Print

Prints details of the active job.
The Print dialog lets you choose the scope and amount of detail to be printed.
Shortcuts
Toolbar:
Keys: CTRL+P

Print Preview

This command lets you preview pages before printing them.
It uses the same Print Dialog as the Print command to specify exactly what parts of the job
should be previewed.

Add Loop Controller

The Add Loop Controller command will display the Add Loop Controller dialog, where you
can choose the type and number of controllers to add to your job.
147