Job Menu - Mircom FleX-Net Configurator Manual

Add UDACT Add UDACT capability to the selected network node.
Context
Dependent
Add Device If the selected tree item is a device loop, add a device or circuit.
If the selected tree item is the Custom Messages branch of a remote
Add Message
annunciator, add a Message.
If the selected tree item is the Input Zones branch of a CPU (QLA or Base I/O
Add Zone
of a Master), add a zone.
If the selected tree item is Output Zones branch of a CPU (QLA or Base I/O
Add Group
of a Master), add a group.
If the selected tree item is Zone, Group, Status, or Device, or a Display Item
Add that can have correlations, launch a dialog that allows correlations to be
Correlations added to the selected item. This does not apply to items selected in the
Input Summary or Output Summary.
Note: Most of these options may also be accessed by right clicking on the appropriate item
in any of the configurator windows.

Job Menu

The Job Menu contains the following commands:
Name Short cut
New Job Ctrl-N;
Open Job Ctrl+O
Description
This command will open the Create Job dialog which will allow you
to start a new job. The new job can be based on a supplied
template or on the job currently open in the configurator.
This command opens a dialog from which you can select any job
or job version that is in your database.
12