Paste Special - Mircom FleX-Net Configurator Manual

e.g. Copying Node 1, or Pasting 3 devices to loop 2.
Number of copies - specifies the number of copies to make. The paste operation will
attempt to make the specified number of copies. If the capacity of the destination is
exceeded a message will be displayed to inform the user how many were successfully made.
Copy I/O correlations - If this box is checked the copied device(s) will have the same I/O
correlations as the original.
Copy display correlations - If this box is checked the copied device(s) will have the same
display correlations as the original.
Retain Address - Check this box to retain the same addresses on the copied devices. A
message will inform the user if this is not possible. Retain Address can fail if the destination
loop controller does not have sufficient free addresses. Retain Address will always fail if the
source and destination are the same loop.

Paste Special

This dialog appears in response to a Paste Special command from the Edit Menu, or right
click where you want to paste and select Paste Special from the pop up menu when pasting
display items, display adders or entire annunciators.
The text summarizes what is being pasted and its destination.
e.g. Copying Node 33, or Pasting 3 display items to frame 0.
Number of copies - specifies the number of copies to make. The paste
•
operation will attempt to make the specified number of copies. If the capacity of
the destination is exceeded a message will be displayed to inform the user how
many were successfully made.
73