Mircom FleX-Net Configurator Manual page 111

Type Yes
SubType Yes
Code No
On
Sens Lvl Pre Addressable
Loops.
On
Sens Addressable
Loops.
On
Sens Lvl 2 Addressable
Loops.
On
Sens Lvl 3 Addressable
Loops.
Sens B Lvl If after hours
Pre specified.
If after hours
Sens B
specified.
If after hours
Sens B Lvl 2
specified.
The process Type of the Device. Can be edited (combo box). The
list of Types shown in the combo box will depend on the Device.
E.g. Device Relay Output Module can be assigned Relay, Signal
or Strobe.
Additional refinement of the type. Always has a value of "None"
for Input Zones.
Applies only to input zones.
The Pre-alarm (or for some device types the trouble) sensitivity
level. Optional.
The alarm level 1 sensitivity of the sensor. Displays a combo with
sensitivity in appropriate units for the device type. Required for
sensors.
The alarm level 2 sensitivity of the sensor. Displays a combo with
sensitivity in appropriate units for the device type. Optional.
The alarm level 3 sensitivity of the sensor. Displays a combo with
sensitivity in appropriate units for the device type. Optional if
Lvl2 specified.
The after hours and night time Pre-alarm (or for some device
types the trouble) sensitivity level. Optional.
The after hours and night time alarm level 1 sensitivity of the
sensor. Displays a combo with sensitivity in appropriate units for
the device type. Required for sensors.
The after hours and night time alarm level 2 sensitivity of the
sensor. Displays a combo with sensitivity in appropriate units for
the device type. Optional.
111