Getting Network Information; Network Connections - Avaya BSGX4e Installation Manual

The following cables are required to install the BSGX4e:
Serial cable To connect the CONSOLE port (DB9 connector) to a terminal (DB9 or
RJ45 to
RJ45 cables
RJ11 to
RJ11 cables
For the signal pinouts of the BSGX4e connectors, see

Getting network information

The BSGX4e is inserted into the network between the router that provides access to
the WAN and the devices on the LAN, including all analog and Voice over Internet
Protocol (VoIP) phones.
BSGX4e between the WAN and LAN.
Figure 3. Network Connections
17
NN47928-303
Universal Serial Bus (USB) connector, depending on the terminal).
To connect the Ethernet ports to the WAN and to the LAN devices,
CAT5E or better is recommended.
NOTE: The cables can be straight or crossover. The BSGX4e ports
automatically determine if pairs need to be crossed over.
To connect the TELECOM ports. The LINE (FXO) port connects to the
central office switch, and the PHONE (FXS) port connects to an analog
device (such as a phone or fax machine).
Figure 3 shows an example layout of an IP network with the
TFTP
SNTP
Server
Server
Signal Pins (page
Softswitch
BSGX4e Business Gateway Installation Guide
43).
Release 01.01