Central Remote Controller
Change the Zone to which the Indoor Unit Belongs (Zone Settings)
When Central control address
is selected
1
On the "Servicing Menu" screen, select "Zone
Settings" and press [ ] (Confirm)
The "Zone Settings" screen appears.
• The indoor unit list display can be selected from the Central control
address order or the Central control address order.
2
Select "Central control address" using [˄] and [˅]
then press [ ] (Confirm)
The "Address list" screen appears.
• Press [
] (Control) to go to the next page.
3
Press [<] [˄] [˅] [>] to select the address, then press
[ ] (Confirm)
The "Zone list" screen appears.
4
Press [<] [˄] [˅] [>] to select a zone No., then press
[ ] (Confirm)
The display returns to the "Address List" screen.
• The selected zone No. appears to the right of the address.
• The number inside < > is the number of units for which the zone No. is set.
• Up to 64 units can be set.
Installation Manual
21
-EN