Table of Contents
Advertisement
5.5
Camera Firmware
Firmware is programming that is inserted into the programmable read- only memory (programmable ROM) of
most FLIR cameras. Firmware is created and tested like software. When ready, it can be distributed like other
software and installed in the programmable read-only memory by the user.
The latest firmware versions often include significant bug fixes and feature enhancements. To determine the
changes made in a specific firmware version, consult the Release Notes.
Firmware is identified by a version number, a build date, and a description.
5.5.1
Determining Firmware Version
To determine the firmware version number of your camera:
Query the GenICam Device Control feature DeviceFirmwareVersion.
n
5.5.2
Upgrading Camera Firmware
Camera firmware can be upgraded or downgraded to later or earlier versions using SpinView, part of the Spinnaker
SDK available from the
Before upgrading firmware:
Install the Spinnaker SDK, available from the
n
Download the firmware file from the
n
To upgrade the firmware:
1. Start Menu-->All Programs-->Point Grey Spinnaker SDK-->SpinView
2. From the Device list, right click the camera and select Update Device Firmware.
If you get a Device is Active warning, close the Display pane or click the Disconnect button and right click
the camera again.
3. Browse to select the firmware file and click Open.
4. Click Yes to continue.
Related Knowledge Base Articles
FLIR software and firmware version numbering scheme/standards
5/4/2017
©2015-2017 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
Downloads
page.
Downloads
Warning! Do not disconnect the camera during the firmware
update process.
Title
Determining the firmware version used by my camera
Should I upgrade my camera firmware or software?
FLIR Blackfly
Downloads
page.
page.
®
S Installation Guide
5 Configuring Blackfly S Setup
Article
Knowledge Base Article 10310
Knowledge Base Article 10312
Knowledge Base Article 10216
15
Hide quick links:
Advertisement
Table of Contents
