Language In The Display; Language Change - AUMA SA-UW Operation Instructions Manual

SA 07.2-UW SA 16.2-UW / SAR 07.2-UW
AC 01.2 Non-Intrusive Profinet
6.4.

Language in the display

6.4.1.

Language change

Select main menu
Change language
Language selection
SAR 16.2-UW Control unit: electronic (MWG)
The display language can be selected.
Display M0009
Language M0049
1. Set selector switch to position 0 (OFF).
2. Press push button C Setup and hold it down for approx. 3 seconds.
Display goes to main menu and indicates: ▶ Display
3. Ok.
Press
Display indicates: ▶ Language
4. Press Ok.
Display indicates the selected language, e.g.: ▶ Deutsch
5. The bottom row of the display indicates:
Save → continue with step 10
Edit → continue with step 6
6. Press Edit.
Display indicates: ▶ Observer (1)
7.
Select user level via
black triangle: ▶ = current setting
white triangle: ▷ = selection (not saved yet)
8. Press Ok.
Display indicates: Password 0***
9. Enter password (→ enter password).
Display indicates: ▶ Language and Save (bottom row)
10. Select new language via
black triangle: ▶ = current setting
white triangle: ▷ = selection (not saved yet)
11. Confirm selection via
The display changes to the new language.The new language selection is saved.
Up ▲ Down ▼ resulting in the following significations:
Up ▲ Down ▼ resulting in the following significations:
Save.
Operation
35