Transport, Storage And Packaging; Transport - AUMA SA-UW Operation Instructions Manual

SA 07.2-UW

Transport, storage and packaging

3. Transport, storage and packaging
3.1.

Transport

10
SA 16.2-UW / SAR 07.2-UW
For transport to place of installation, use sturdy packaging.
Suspended load!
Death or serious injury.
Do NOT stand below suspended load.
Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting
by hoist to valve and NOT to actuator.
Actuators mounted to gearboxes: Attach ropes or hooks for the purpose of lifting
by hoist only to the gearbox using eyebolts and NOT to the actuator.
Respect total weight of combination (actuator, gearbox, valve)
Secure load against falling down, sliding or tilting.
Perform lift trial at low height to eliminate any potential danger e.g. by tilting.
Figure 7: Example: Lifting the actuator
Table 3:
Weights of multi-turn actuator SA 07.2-UW
with 3-phase AC motors
Type designation
Actuator
SA 07.2-UW/
SAR 07.2-UW
SA 07.6-UW/
SAR 07.6-UW
SA 10.2-UW/
SAR 10.2-UW
SA 14.2-UW/
SAR 14.2-UW
SA 14.6-UW/
SAR 14.6-UW
SA 16.2-UW/
SAR 16.2-UW
1) Refer to motor name plate
2) Indicated weight includes AUMA NORM multi-turn actuator with 3-phase AC motor, electrical con-
nection or actuator plug/socket connector incl. cable glands (approx. 2.3 kg) and double sealed in-
termediate frame (approx. 1.2 kg) as well as output drive type B1. For other output drive types, heed
additional weights. Heed weight of cables if plug/socket connector is linked.
SAR 16.2-UW Control unit: electronic (MWG)
AC 01.2 Non-Intrusive Profinet
SA 16.2-UW/ SAR 07.2-UW
1)
Motor type
VD...
AD...
VD...
AD...
VD...
AD...
VD...
AD...
VD...
AD...
VD...
AD...
SAR 16.2-UW
2)
Weight
approx. [kg]
25
26
25
27
31
33
54
58
56
62
72
93