User Level, Password - AUMA SA-UW Operation Instructions Manual

SA 07.2-UW SA 16.2-UW / SAR 07.2-UW
AC 01.2 Non-Intrusive Profinet
Direct display via ID
6.3.

User level, password

User level
Password
SAR 16.2-UW Control unit: electronic (MWG)
the push buttons on the local controls have not been operated within 10 minutes
or by briefly pressing C
When entering the ID within the main menu, screens can be displayed directly (without
clicking through).
Figure 32: Direct display (example)
Display indicates in the bottom row: Go to
1. Press push button
Display indicates: Go to menu M0000
2.
Use push buttons
3. Press push button
4. Repeat steps 2 and 3 for all further digits.
5. To cancel the process: Press C Esc.
The user level defines which menu items or parameters can be displayed or modified
by the active user.
There are 6 different user levels. The user level is indicated in the top row:
Figure 33: User level display (example)
A password must be entered to allow parameter modification. The display indicates:
Password 0***
A specific password is assigned to each user level and permits different actions.
Table 24:
User levels and authorisations
Designation (user level)
Observer (1)
Operator (2)
Maintenance (3)
Specialist (4)
Service (5)
AUMA (6)
Unauthorised access due to insecure password!
We recommend changing the password during initial commissioning.
Go to.
Up ▲ Down ▼ to select figures 0 to 9.
Ok to confirm first digit.
Authorisation/password
Verify settings
No password required
Change settings
Default factory password: 0000
Reserved for future extensions
Change device configuration
e.g. type of seating, assignment of output contacts
Default factory password: 0000
Service staff
Change configuration settings
AUMA administrator
Operation
33