Sf Electrical Connection (Auma Plug/Socket Connector) - AUMA SA-UW Operation Instructions Manual

SA 07.2-UW
Electrical connection
5.3.

SF electrical connection (AUMA plug/socket connector)

Short description
Technical data
20
SA 16.2-UW / SAR 07.2-UW
Figure 16: SF electrical connection
[1] Cover of actuator controls electrical connection (XK)
For customer connection of power supply and e.g. to control room
[2] Socket carrier with screw-type terminals
[1]* Cover of wall bracket plug socket connector (XM)
The plug/socket connector of LSW 68 cable set is readily assembled (wired)
For LSW 69 cable set, the plug/socket connector must be opened and the
cables must be connected to the pin carrier.
[2]* Pin carrier with crimp-type connection
Plug-in electrical connection with screw-type terminals for power and control contacts.
Control contacts also available as crimp-type connection as an option.
SF version. For power and control cable connection, remove the AUMA plug/socket
connector and the socket carrier from terminal compartment. Removing the cover
is sufficient for connecting the fieldbus cables.
Table 13:
Electrical connection via AUMA plug/socket connector
No. of contacts max.
Designation
Connection voltage max.
Rated current max.
Type of customer connection
Connection diameter max.
SAR 16.2-UW Control unit: electronic (MWG)
Power contacts Control contacts
6 (3 equipped) + protective 50 pins/sockets
earth conductor (PE)
U1, V1, W1, U2, V2, W2, PE 1 to 50
750 V 250 V
25 A 16 A
Screw connection Screw connection, crimp-type (option)
2
6 mm (flexible) 2.5 mm
2
10 mm (solid) (flexible or solid)
AC 01.2 Non-Intrusive Profinet
(SF version)
(S version)
2