Table of Contents
Advertisement
SA 07.2-UW
SA 16.2-UW / SAR 07.2-UW
AC 01.2 Non-Intrusive Profinet
6.1.2.
Actuator operation from remote
Information
6.2.
Menu navigation via push buttons (for settings and indications)
SAR 16.2-UW Control unit: electronic (MWG)
Risk of immediate actuator operation when switching on!
Risk of personal injuries or damage to the valve
If the actuator starts unexpectedly: Immediately turn selector switch to 0 (OFF).
Check input signals and functions.
Set selector switch to position Remote control (REMOTE).
For actuators equipped with a positioner, it is possible to change over between OPEN
- CLOSE control (Remote OPEN-CLOSE) and setpoint control (Remote SET-
POINT). For further information, please refer to the Manual (Operation and setting).
Menu navigation for display and setting is made via the push buttons [1
local controls.
Set the selector switch [5] to position 0 (OFF) when navigating through the menu.
The bottom row of the display [6] serves as navigation support and explains which
push buttons [1
4] are used for menu navigation.
Figure 28:
[1 4] Push buttons or navigation support
[5]
Selector switch
[6]
Display
Operation
4] of the
31
Hide quick links:
Advertisement
Table of Contents
