Terminal Compartment (For Mains Connection): Open - AUMA SA-UW Operation Instructions Manual

SA 07.2-UW SA 16.2-UW / SAR 07.2-UW
AC 01.2 Non-Intrusive Profinet
5.3.1.

Terminal compartment (for mains connection): open

Information
SAR 16.2-UW Control unit: electronic (MWG)
Figure 17: Open mains terminal compartment
[1] Connection housing
[2] Screws for frame
[3] O-ring
[4] Screws for socket carrier
[5] Socket carrier
[6] Cable entries for mains connection (power and control contacts)
[7] Blanking plug
[8] Cable gland (not included in delivery)
Electric shock due to presence of hazardous voltage!
Failure to observe this warning results in death or serious injury.
Disconnect device from the mains before opening.
1. Loosen screws [2] and remove connection housing [1].
2. Loosen screws [4] and remove socket carrier [5] from connection housing [1].
3. Insert cable glands [8] suitable for connecting cables.
The enclosure protection IP... stated on the name plate is only ensured if suit-
able cable glands are used.
Figure 18: Example: Name plate for enclosure protection IP68
4. Seal unused cable entries [6] with suitable blanking plugs [7].
Fieldbus connection can be accessed separately from the mains connection (refer
to <Fieldbus terminal compartment: open>.
Electrical connection
21