User Level, Password; Password Entry - AUMA SQ 05.2 Manual

Operation
7.4.

User level, password

User level
Password
7.4.1.

Password entry

34
SQ 05.2 SQ 14.2/SQR 05.2
Figure 31: Direct display (example)
Display indicates in the bottom row: Go to
1. Press push button
Display indicates: Go to menu M0000
2. Use push buttons
3. Press push button
4. Repeat steps 2 and 3 for all further digits.
5. To cancel the process: Press C Esc.
The user level defines which menu items or parameters can be displayed or modified
by the active user.
There are 6 different user levels. The user level is indicated in the top row:
Figure 32: User level display (example)
A password must be entered to allow parameter modification. The display indicates:
Password 0***
A specific password is assigned to each user level and permits different actions.
Table 18:
User levels and authorisations
Designation (user level)
Observer (1)
Operator (2)
Maintenance (3)
Specialist (4)
Service (5)
AUMA (6)
Unauthorised access is made easier due to insecure password!
We urgently recommend changing the password during initial commissioning.
1. Select desired menu and hold down push button
Display indicates the set user level, e.g Observer (1)
2. Select higher user level via
Display indicates: Password 0***
SQR 14.2 Control unit: electronic (MWG)
Go to.
Up ▲ Down ▼ to select figures 0 to 9.
Ok to confirm first digit.
Authorisation/password
Verify settings
No password required
Change settings
Default factory password: 0000
Reserved for future extensions
Change device configuration
e.g. type of seating, assignment of output contacts
Default factory password: 0000
Service staff
Change configuration settings
AUMA administrator
Up ▲ and confirm with
AC 01.2 Non-Intrusive
for approx. 3 seconds.
Ok.